Bright Wires & TENAS Factory

The OFI 200 Optical Fiber Identifier is a low cost, hand-held instrument designed to detect optical signals without disrupting traffic. During maintenance, installations, rerouting or restorations, it’s often necessary to isolate a specific fiber. By simply clamping the OFI 200 onto a fiber, the unit will indicate if there is no signal, a 2 kHz tone, or traffic and show signal direction.
The OFI 200 is available in two models. The OFI 200B is recommended for 250 µm and ribbon "bare" fiber applications. The OFI 200C is recommended for up to 3 mm jacketed fiber. Both models are equipped with a unique two-position head design that can be configured to work with 250 µm, 900 µm, ribbon, or jacketed fiber in seconds, without tools or adjustments.

features
• Accepts 250 µm, 900 µm coated fiber,
3mm jacketed fiber cable, and ribbon fiber
• No head swapping or adjustments
• Identifies light carrying fiber
• Low cost, easy to use
• Hand-held, 9V battery operated
• Low insertion loss - traffic remains
uninterrupted
• Indicates 2 kHz Tone visually and audibly
• Indicates direction of traffic

Fiber Optic Talk Sets are an inexpensive solution to meet your communication needs when
testing multimode or singlemode fiber optic cables. Designed for voice communication
over spare fibers, they provide full duplex, hands-free operation. Ease of use and compact
size allow the operators to focus on the task at hand, rather than operating the talk set.

features
• Single fiber, full duplex
• Multimode and single-mode models
• Field portable, hands-free operation
• Automatic connection
• Multiparty communication
• Digital technology
• Call-back feature/ringing (FTS 2)
• Communicates with T500B Talk Option (FTS 2)
FTS-

The VOA 5-MM (multimode) and VOA 5-SM (singlemode) are hand-held, field-rugged variable optical attenuators suited for a wide range of fiber link certification and production test applications. The VOA 5 can be operated under local control (front panel keypad) or from a PC via a serial link using the supplied PC software. The VOA 5 offers high bi-directional return loss and will maintain the set attenuation level when the unit is powered down.

features
• Multimode and singlemode models
• Hand-held (0.55 kg, 1.22 lb)
• High speed (0 to 60 dB < 3 s)
• Low insertion loss (< 2 dB, singlemode)
• Remote (SCPI) control via serial port
• LabVIEW® drivers provided
• AA Alkaline, NiCad, or AC powering
• Long battery life (> 16 hours)

The SVA 1 Singlemode Variable Attenuator advances fiber optic field testing by offering
superior performance in a low cost hand-held package. Utilizing a simplified, industry
accepted attenuation technique, the innovative design of the SVA 1 offers superior
resolution across the entire 60 dB dynamic range.

features
• 1310 and 1550 nm single-mode
• Lightweight
• Coarse and fine adjustments
• 60 dB dynamic range
• Better than 60 dB isolation
available
• FC, SC, or ST Style Outputs
• Low insertion loss