Bright Wires & TENAS Factory

This portable optical power meter may be used to measure optical power in premises, telco, or broadband fiber optic networks. When used with an LED or laser light source, the OPM 1 can also measure the attenuation (insertion loss) of multimode or single-mode cables. With only two controls – ON/OFF and wavelength – the OPM 1 is our simplest to use optical power meter. Optical power in dBm and the calibration wavelength setting are displayed on an easy-to-read LCD display. The optical input port accepts Noyes thread-on
style connector adapter caps. Adapter caps are required and must be ordered separately. The OPM 1 is fully N.I.S.T. traceable and runs on a standard 9-volt alkaline battery.

features
• 850, 1300, 1310, 1550 nm
• Premises (Ge) and broadband (InGaAs)
models
• Displays optical power (dBm)
• Our simplest to use optical power meter
• N.I.S.T. traceable
NOYES

OPM 4 series optical power meters may be used to measure optical power in premises, telco, or broadband fiber optic networks. When used with an LED or laser light source, the OPM 4 can also measure the attenuation (insertion loss) of multimode or single-mode cables. Simple to use, the OPM 4 stores reference settings for each calibration wavelength. An easy to read LCD display shows optical power (dBm or µW) or insertion loss (dB) and the calibration wavelength (nm). The optical input port accepts Noyes thread-on style connector adapter caps. Adapter caps are required and must be ordered separately. The OPM 4 is fully
N.I.S.T. traceable and runs on a standard 9-volt alkaline battery.

features
• 660, 780, 850, 980, 1300, 1310, 1480,
1550, 1625 nm
• Short wavelength (Si), premises (Ge), and broadband (InGaAs) models
• High-power (+26 dBm) model
• Displays power (dBm or µW) or insertion loss (dB)
• N.I.S.T. Traceable

OPM 5 series optical power meters may be used to measure optical power in premises, telco, or broadband fiber optic networks. When used with an LED or laser light source, the OPM 5 can also measure the attenuation (insertion loss) of multimode or single-mode cables. The OPM 5 stores reference settings for each calibration wavelength. An easy to read LCD display shows optical power (dBm or µW) or insertion loss (dB) and the calibration wavelength (nm).

features
• 660, 780, 850, 980, 1300, 1310, 1480, 1550, 1625 nm
• Short wavelength (Si), premises (Ge) and broadband (InGaAs) models
• High-power (+26 dBm) model
• Displays power (dBm or µW) or insertion loss (dB)
• Stores test results for up to 500 fibers
• Windows® software to view, print, and archive results
• N.I.S.T traceable